Viking Repair Pros Los Angeles, CA (213) 652-7030

Los Angeles, CA

Two ways in, and both of them are quick

Tell us what the oven is doing and roughly when it started. That description decides what goes on the van, which is most of why a first visit fixes it.

Call (213) 652-7030 Answered 24/7 Book online Pick a slot Straight to the booking page
  • Hours we work8:00 am – 8:00 pm, seven days
  • Call-out$89, taken off the repair
  • EquipmentViking only
  • ServingLos Angeles, west Valley to the coast
Flat steel plate carrying a pivot barrel and a stub arm, an L-bracket with a keyhole slot and a sleeve bushing on a towel with bolts, square nuts, a dusting brush, screwdrivers and pliers. Numbered marks are drawn over it, at the pivot barrel on the plate, keyhole slot in the bracket and the sleeve bushing.
What comes out of an oven door when the latch stops releasing.
  1. Pivot barrel on the plate
  2. Keyhole slot in the bracket
  3. Sleeve bushing

01What happens next

From the call to the panel going back on

  1. 01

    You describe it in your own words

    What the oven does, at what point it does it, and what else changed around the time it started. That description is most of the diagnosis and it decides what gets loaded before anyone sets off.

  2. 02

    A slot inside the working day

    Work runs 8:00 am – 8:00 pm, seven days. You are told which part of the day, not which twelve hours.

  3. 03

    Diagnosis, then a number

    The $89 pays for the visit and the fault-finding. What the repair costs is agreed before the work starts, and the call-out comes off it.

  4. 04

    Back together properly

    Panels refitted, the door re-lined so it shuts square on both sides, cabinetry unmarked, and the oven run up to temperature before anyone leaves.

02Reviews

What Los Angeles kitchens said afterwards

4.9/ 5892 reviews

  • Salt air had eaten the burner caps and everything lit unevenly. He cleaned the ports, swapped two caps, and pointed out where the sea breeze gets in through our open kitchen window.

    Marcela O.Venice

  • Our freezer drawer stopped sealing after the movers dragged it. He replaced the gasket, realigned the drawer runners and the frost stopped building. He wiped down the tracks before he left too.

    Nestor V.Playa Vista

  • Cycle stalled at the drain step and the lights blinked. The disposal air gap in the counter was clogged solid, plus a tired drain pump. Both handled in one trip, no upselling.

    Kendrick O.Playa Vista